FREE HIT COUNTER
 
Ms Pacman or Pacman PCB Repair
 
for your Ms Pac-man video game
Computer Aided Testing System 
Ms Pacman Test Procedure
Ms Pacman Test Examples
Ms Pacman Test Table
Ms Pacman PCB Exchange
 Pacman to Ms Pac-man Convert
Ms Pacman PCB Mods
Index of Links
Other PCB's tested 

Have a Question? Live chat here, enter any user name, (Leave password field blank, no need to register)

 

    The following information describes the testing and diagnosis your Pacman or Ms Pacman PCB will undergo when you send it in for repair. All Ms Pac-man and Pacman-type game boards submitted for repair undergo these tests.
    W
hen the testing device / software application  loads the test table for Pac-man or Ms Pac-man, the hardware interface device switches to the Z-80 type microprocessor, and the various sections of circuitry which make up the Pacman type PCB can be examined and verified.   

Ms Pac man repair:          each section of the board is tested and verified:
      Every program chip is verified and compared against a master data reference, and is replaced or reprogrammed, as required. All connections in the sockets for these chips are also analyzed, as the Ms Pac-man test procedure is performed while the program chips physically exist on the circuit board under test.  
    
 
   All variations of conversions can be tested and repaired. Original 4-chip, 6-chip, 8-chip, single-chip, and multiple game types are supported with the testing system.    
 Any combination of the Pacman or Ms Pacman program chip versions  are accommodated for, as software automatically adjusts for these differences during the processing of the test request.
   Verify program on Ms Pac-man.       If while testing Z-80 socket 6B the program chip (6F) is found to be the regular speed version, an optional rapid speed upgrade is available.
 
More information on the areas of the Pac-man circuitry which are verified and tested:
    
       By selecting tests from the test table, the system is fully capable of diagnosing and verifying  the following areas of the Pacman game board. The underlined links provide further information.
 
   2114 Ram chips   Real-time DIP switch    Moving character tests
  Player 2 invert screen.   Sound  circuitry   Watchdog reset
  Interrupt verify   Player Input   Text screen test patterns
  Accounting output   Program chips   NVC 284
  NVC 285   Color Screen tests   All addressing lines
  All data lines   Individual chip tests  Address buffers
 Address decoding    
Each link above pertains to a specific test group. This group consists of selected test numbers from the test table, sorted by objective. These tests run be run individually, as a group, or repeated until indications are satisfied that no errors exist in each section of the Pacman circuitry.                                   
Continuous testing is performed.
 
      Many failures due not occur until this process is performed. During this testing phase, all activity is recorded, and then analyzed. Groups of tests are run many times, searching for errors.
Any faults detected are highlighted while viewing the "Error Analysis" screen, and the possible causes are listed by probability. One example of such a report is viewable by selecting the following link:   Error Analysis  utilizing the GLS1 Electronics Computer Aided Testing System .
      For checking / verifying  individual chip operation, or for troubleshooting to the component level, detailed information is available at:
Troubleshooting tool used for Ms Pac-man PCB 
     Use of the above software allows GLS1 Electronics to "run" the circuitry through specific address ranges, and control conditions which pertain to the targeted / suspected IC.  
 

     Boards are burned in for a minimum of 48 hours and are shipped back to customer within 2 business days of passing inspection, testing, and burn-in.
     Ms Pac-man / Pac-man game boards submitted for repair must be complete, (all custom IC's and sub boards) and in repairable condition, (not physically damaged). If your PCB is missing parts, it can still be repaired, send in PCB for estimate, or contact GLS1 Electronics beforehand.

          
Shipping and pricing information.
 
   Payments for this service can be made by enclosing check in box with board. Please include $12.00 for return  shipping.
   Paypal is also accepted. Contact me for Paypal address. Return shipping method used is USPS priority mail, which is usually a 2-day delivery time. 
  All Pacman or Ms Pacman repairs are warranted for 180 days.
 
This information on this page was last updated on January 19th, 2008.

 

          Shipping Address
    
 
 
 
Item Name: Pac-man or Ms Pac-man Repair Service
Item Number: RSP-1
Price: $79.00

  

    
 
 
 

     Item Name: Pac-man and Ms Pac-man combined on one board + Repair Service
Item Number: RSPC-1

Price: $129.00         more information

 

 
 
 

     Item Name: 4 Pac-man/Ms Pac-man variations combined on one board + Repair Service
Item Number: RSPC-4

Price: $159.00         more information

   

 

 
 
     GLS1 Electronics will also consider non-working Pac-man / Ms Pac-man PCB trade-ins as payment for repair services.   Contact me  for more information.  

  Pacman board modifications